100% Cotton Flannel Bulk Pak Round Cleaning Patches Brownells

100% Cotton Flannel Bulk Pak Round Cleaning Patches Brownells Reviews : If you're looking for 100% Cotton Flannel Bulk Pak Round Cleaning Patches Brownells. Get Cheap 100% Cotton Flannel Bulk Pak Round Cleaning Patches Brownells for Best deal Now!!
 

100% Cotton Flannel Bulk Pak Round Cleaning Patches Brownells.

Availability :
In Stock
Save money and get guns cleaner. These round patches are made of 100% cotton flannel, fleeced on both sides to be ...

Super Absorbent In Hard-To-Find Shape

Save money and get guns cleaner. These round patches are made of 100% cotton flannel, fleeced on both sides to be extra absor-    bent, and bulk packed in 1000’s. All natural fibers carry far more solvent or oil into a bore than any synthetic patch can. Soak up and carry far more crud and fouling out! Big Price savings from buying in bulk, gives lots more patches for the buck. Hundreds of other uses, too.


Big Book Catalog, Issue:71, Page:339

SPECS: Sold per 1000 in bulk pak.

Steel Neck Bushings Redding.

Availability :
In Stock
Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings ...

Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size.

View other sizes:

Determining Redding Bushing Size
The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet.

If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip.

Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip.


Sinclair, Issue:1B, Page:043